Radarr is the part of your media setup that looks after films. You tell it which films you want, it finds them, fetches them and files them in tidy folders, and your media server picks them up from there.
On this page
At a glance#
- What it is
- Film Manager Media
- Where it opens
- Films
On its own port at
http://your-server:port, orradarr.your-domainonce you have a domain - Updates
- Automatic A backup is taken first, and it rolls back if the update fails
- Backups
- Included Part of the daily backup when that's switched on
- Copies
- One per server
What it's good for#
Keeping a film collection by hand means searching, downloading, renaming and moving files, over and over. Radarr does that routine for you. You add a film to its list, and it keeps an eye out for a copy, fetches it through a download client (the program that does the actual downloading), and puts it in the right folder with a sensible name.
Radarr is for films. Its sibling Sonarr does the same for TV shows. Radarr doesn't play anything itself: that is the job of a media server such as Jellyfin.
Radarr needs two other things
Radarr finds films by asking search sites (called indexers), and it needs a download client to fetch them. LibrePortal doesn't choose either for you. Prowlarr keeps your search sites in one place and shares them with Radarr, and Decypharr can be the download client if you use Real-Debrid. You add your own search sites and download client yourself.
Signing in#
Radarr is never left open. LibrePortal switches on its sign-in after the first start, using a user name and password it makes for you. Both are in the Login Details shown when the install finishes. Press Welcome on the app's page to see them again. Open Radarr with the Web Interface button.
If LibrePortal can't set the sign-in, the install says so, and Radarr asks you to choose a user and password the first time you open it.
If you change the password inside Radarr, do it there rather than in LibrePortal's settings, because LibrePortal only sets it once.
How to use it#
- Check the film folder. On install LibrePortal adds
/media/moviesto Radarr as a root folder, which is the place it files films. You shouldn't need to touch it. - Add a download client. In Radarr, open Settings and then Download Clients, and add the one you use. With Decypharr installed through Jellyfin's extras, this is already done.
- Add a film. Use the search box, pick the film, choose the root folder and add it. Radarr starts looking straight away.
Your search sites come from Prowlarr if you have it. If not, add them in Radarr under Settings, then Indexers.
Works with#
- Jellyfin. Radarr saves films in
/media/moviesinside the shared media folder. When Jellyfin is installed, that is Jellyfin's ownmediafolder, and the Automatic films & TV extra gives Jellyfin a Films library for it. Without Jellyfin, Radarr keeps a media folder of its own. - Prowlarr. Prowlarr shares its search sites with Radarr, and keeps them in step when you change them.
- Seerr. Seerr lets the people you share with ask for films, and sends those requests to Radarr.
- Decypharr. Added to Radarr as its download client, so films come from your Real-Debrid account.
- Bazarr. Bazarr watches Radarr's film list and finds subtitles for what is in it.
The easy way to get all of these connected is Tools on Jellyfin's page, then Add or Remove Extras. LibrePortal installs the apps and links them for you. You can also install Radarr alone from the App Center and connect things yourself.
Good to know#
- It is limited to 1 GB of memory. With the other helper apps, expect about 1.5 GB for the whole set.
- Updates are automatic. LibrePortal pins an exact version and offers newer ones as a step. A recovery snapshot is taken first, and the update is rolled back if Radarr doesn't answer afterwards.
- Usage analytics are switched off. Radarr does look up film details from Radarr's own online metadata service when you add a film, and sends your searches to whichever search sites you add.
- Backups are on by default. Radarr's settings and film list are in them.
- One per server.
Addresses and ports#
Radarr has one port. LibrePortal picks a free port number for each when you install, so yours will differ from anyone else's. The Config tab's Network section shows them, and the app's Open button uses the right one. "Anyone" means it's reachable from wherever your server is reachable; you can make it private later.
| What it is | Who can reach it | With a domain |
|---|---|---|
| Films | Anyone | radarr.your-domain |
Settings#
In its config file#
Radarr's own settings aren't on the Config tab yet. They live in the app's config file, described here so you know they exist. How to change them.
| Setting | What it does | Starts as |
|---|---|---|
NameCFG_RADARR_DISPLAY_NAME |
What this app is called on your dashboards. Leave empty to use its usual name | Empty |
Show on the LibrePortal DashboardCFG_RADARR_SHOW_ON_DASHBOARD |
Whether this app gets a shortcut on the front page of the LibrePortal WebUI, separate from any Dashy dashboard Choices: true, false |
false |
Domain SupportCFG_RADARR_DOMAIN_SUPPORT |
What this app can do with more than one address | one |
Domain ChangeCFG_RADARR_DOMAIN_CHANGE |
What moving it to another domain after install breaks | free |
Extra AddressesCFG_RADARR_ALIASES |
Other addresses that serve this app in full, comma-separated | Empty |
Old AddressesCFG_RADARR_REDIRECTS |
Other addresses that send visitors on to this app, comma-separated | Empty |
Works with#
These are the other apps Radarr knows how to work with. Once it's installed, its page shows the same list with whether each one is connected. How this works.
- Grafana: Shows dashboards for the apps that have one. works with every app
- Jellyfin: Ask for a film or show and it is found and added to Jellyfin.
- Prometheus: Collects metrics from the apps that can export them. works with every app
- Uptime Kuma: Watches your apps and shows when one goes down. works with every app
Privacy and security#
Worth knowing Radarr looks up film details from Radarr's metadata service (TMDb data) and asks your indexers for releases. Analytics are turned off.
What leaves this server#
- Film titles and ids go to Radarr's metadata service when you add a film
- Searches go to the indexers you add
What LibrePortal turns off#
- Usage analytics (Radarr's own option, off in the compose)
Licence: GPL-3.0. Audited: 4 November 2026. See the privacy of every app and the Promise.
Sources#
Under the hood#
- It runs this image:
lscr.io/linuxserver/radarr:6.4.4.10685-ls325@sha256:ade5937813c6ae415b29db729386e53fea3ecf067a019849bafbe2d2a6ec02ba. - It can sit behind Authelia's sign-in once Authelia is installed.
- Its own project and documentation: github.com/Radarr/Radarr
Ports, settings, tools and connections on this page are read from LibrePortal v0.10.130's app catalogue each time the guide is built.